600whp 2006 Chevrolet Corvette Z06 2LZ

Price/Location
$45,500 - Houston, TX
Posted
Updated
600whp 2006 Chevrolet Corvette Z06 2LZ
This vehicle has been sold, however more vehicles can be viewed here.

Essentials

  • VIN: 1G1YY26EX65129281
  • Title Status: Clean Title
  • Chassis Mileage: 48,000
  • Build Mileage: 1,800

Description

600whp 2006 Chevrolet Corvette Z06 2LZ in Black with 48,000 (Chassis) miles for sale! This clean C6Z is powered by a fully forged/Darton sleeved LS7 that’s mated to a Stage 3 built T-56 6-speed manual transmission with a Monster LT1-S triple disc clutch. More specifically, the engine build begins with a Darton re-sleeved LS7 block that was fitted with forged diamond pistons, titanium forged rods, and a LS7 forged crankshaft. The top end features CNC ported Hooper headers along with a Martin Smallwood custom camshaft, followed by all supporting valvetrain upgrades, 102mm throttle body, and a Halltech 103 intake. Additional key components include a set of FIC 850cc fuel injectors, LG Motorsports headers, Billy Boat exhaust, ZR1 slave cylinder, billet clutch shim, C6 ZR1 wheels, and a set of Forgestar CM5 wheels. Modifications were installed by the owner, and tuning was handled by Horsepower Factory TX with an output of 600whp. The car is set up to make 1000+whp with boost, with an intake manifold swap it’ll easily make mid 600whp, but due to plans of boosting there was no need to swap it. The exterior is a 9/10, interior is a 9/10, and mechanically, the car has 60psi cold and 55psi hot oil pressure. There are currently only 1,800 miles on the build! Most receipts are available along with pictures/videos since everything was installed by the owner. Clean title in the owner’s name with 0 accidents!

Modifications

Engine:

  • Darton Re-Sleeved LS7 Block
  • Forged Diamond Pistons
  • Titanium Forged Rods
  • LS7 Forged Crankshaft
  • ARP Main Studs
  • CNC Ported Hooper Heads
  • Valve Guides Are Fixed
  • Upgraded Manley Exhaust Valves
  • 60cc Combustion Chambers
  • .750 Springs w/ Upgraded Retainers
  • Martin Smallwood Custom Camshaft 250/264 .657/.648 110 LSA
  • New GM LS7 Oil Pump
  • Upgraded Timing Chain
  • All New Head Gaskets
  • ATI Harmonic Balancer
  • Halltech 103 Intake
  • 102mm Throttle Body

Fuel System:

  • FIC 850cc Fuel Injectors

Exhaust:

  • LG Motorsports Headers
  • Billy Boat Exhaust

Drivetrain:

  • Stage 3 Built T-56 6-Speed Manual Transmission
  • Monster LT1-S Triple Disc Clutch
  • ZR1 Slave Cylinder
  • Billet Clutch Shim

Wheels & Tires:

  • 18/19 C6 ZR1 Wheels w/ 275/35/18 Toyo Proxes R888 Front Tires & 325/30/19 Mickey Thompson ET Street S/S Drag Radials (90% Life Left)
  • 19x10 & 18x12 Forgestar CM5 Wheels Finished in Matte Black

Videos