Essentials
Description
1109+whp 2013 Chevrolet Corvette ZR1 3ZR in Black with 18,050 (Chassis) miles for sale! This sinister C6 ZR1 was transformed into a well-sorted 4-digit street car by the team at Accelerated Racing Solutions, backed by over $70K in receipts and documented with build photos taken throughout the assembly process.
Power comes from a monstrous 427 LSR professionally prepped and assembled by Late Model Engines. The foundation is an LSR aluminum racing block rated to 2000hp, built around a Callies Apex 4.0" stroke dry sump crankshaft, Dyres 300M billet H-beam connecting rods, and Diamond/LME custom forged pistons with a Total Seal AP stainless chrome top package. Up top, the engine features a Cam Motion camshaft spec'd by GP Tuning for the 2650 application, a pair of Brodix BR3/9 cylinder heads, Johnson high-RPM tie-bar hydraulic roller lifters, Manley pushrods, ARP 2000 Pro Series head fasteners, a CHE trunnion kit, Cometic MLX head gaskets, and a set of LME billet short valve covers.
Boost comes from a Kong Performance TVS2650 supercharger, offering several efficiency and performance improvements over the standard LS9 TVS2300. The supercharger was optioned with a Kong Performance Gen 3 billet lid finished in a dual-color black and blue powder coat, and breathes through a Kong Performance carbon fiber ram air intake system.
Fueling was addressed with a Fore Innovations triple pump fuel system, LS9 fuel rails, Injector Dynamics 1750 fuel injectors, and all necessary supporting hardware.
The drivetrain received an RPM Level 6 built TR-6060 6-speed manual transmission paired with a Monster SC triple disc clutch kit. The transmission build includes bronze fork pads, ZR1 2nd, 3rd, and reverse gears, a 1/2 synchro assembly, 1/2/3/4 carbon rings, a full gasket and seal kit, and all internal components were micro-polished. Additional drivetrain upgrades include an MGW short throw shifter, and an RPM C6 ZR1 torque tube with a carbon billet prop shaft, coupler delete, torque tube bearings and slinger.
Tuning was handled by Justin White Tuned across multiple sessions on both the dyno and the street. The car previously logged 1109whp on the stock fuel system (hub dyno), and has since been re-calibrated/re-tuned following the triple pump fuel system installation, though it hasn't returned to the dyno for an official number with the new setup. On the street, the car went from 60-130mph in the low 4-second range in 80° weather with 1500 DA.
The factory Black paint is protected under a full body paint protection film wrap and ceramic coating, both installed by The Detail Lab Texas. The car rides on a nicely spec’d set of 19" Forgeline GS1R wheels wrapped in Michelin Pilot Sport Cup 2 tires up front, followed by a pair of Toyo Proxes R out back to assist with traction.
There are currently only 2,000 miles on the build. No issues, no compromises, this C6 ZR1 is dialed in and ready to be driven.
Factory Options
- Black Exterior
- 3ZR Preferred Equipment Group
- Tremec TR-6060 6-Speed Manual Transmission
Modifications
Engine:
- Late Model Engines (LME) 427 Complete Long Block Assembly w/ Engine Dyno
- LME Proprietary Short Block Balance, Blueprint & Assembly
- LSR Aluminum Race Block Rated to 2000HP
- 6-Bolts Per Cylinder, Billet Main Caps & Priority Main Oiliing
- Callies Apex LS CWT 4.0” Stroke Dry Sump Crankshaft
- Dyres 300M Billet H-Beam Connecting Rods
- Diamond/LME Custom Forged Pistons
- Total Seal AP Stainless Chrome Top Ring Package
- Cloyes C5R Single Roller Timing Set
- Brodix BR3/9 Cylinder Heads
- Cam Motion GP Tuning LSR Camshaft (2650 Application)
- Johnson High-RPM Tie-Bar Hydraulic Roller Lifters
- Manley One-Piece 3/8” x .135” Heavy Wall Pushrods
- ARP 2000 Pro Series 12-Point Head Fasteners
- CHE Trunnions
- Cometic MLX Head Gaskets
- LME LS9 Billet Short Valve Covers, Power Coated
Supercharger System:
- Kong Performance TVS2650 Supercharger
- Kong Performance Gen 3 Billet Supercharger Lid, Dual-Color Powder Coated (Black & Blue)
- Kong Performance Carbon Fiber Ram Air Intake System
Fuel System:
- Fore Innovations Triple Pump Fuel System
- Controller Harness
- Billet Bracket
- LS9 Fuel Rails
- Filter & Fittings Upgrade
- Injector Dynamics 1750 Fuel Injectors
- Fuel Pressure Sensor Adapter
- ORB Swivel Banjo-to-AN Fittings
- Straight & 90* AN Fittings
- DTM Connectors x7
Drivetrain:
- RPM Level 6 TR-6060 6-Speed Manual Transmission
- Bronze Fork Pads
- ZR1 2nd, 3rd & Reverse Gears
- 1/2 Synchro Assembly
- 1/2/3/4 Carbon Rings
- Full Gasket/Seal Kit
- All Internal Parts Micro-polished
- Monster SC Triple Disc Clutch Kit w/ Billet Bearing Support
- Monster Clutch Shim
- MGW Short Throw Shifter
- RPM C6 ZR1 Torque Tube w/ Carbon Billet Prop Shaft, Coupler Delete, Torque Tube Bearings & Slinger
Wheels & Tires:
- 19” Forgeline GS1R Wheels Finished in Black
- 295/30ZR19 Michelin Pilot Sport Cup 2 Tires
- Rear Toyo Proxes R Tires
Interior:
- Full Ceramic Window Tint
Exterior:
- Full Body Paint Protection Film (PPF) w/ Layer of Track Pack Film on Top
- Full Body Ceramic Coating
- Carbon Fiber Rear Diffuser
Image Gallery
