Skip to main content

805+whp 2013 Chevrolet Corvette Grand Sport 3LT

Price / Location
$55,000 - Westerville, OH
Posted
Updated
This vehicle has been sold! We were able to connect the seller with a serious buyer, and we'd love to do the same for you. Looking for a similar build or interested in seeing what else is available? Check out our current listings!

Verified Offer Flow

Ask a Question

Have a question about this vehicle? Send a message to the seller.

Verification Required

Connect With the Seller

To maintain a professional marketplace and protect our sellers' time, we require a valid payment method on file to send messages.

  • No charges will be made
  • Card is only charged if you place a deposit
  • Secure processing via Stripe
  • Takes 30 seconds

Why do we require this?

This ensures only serious, verified buyers contact sellers, creating a better experience for everyone.

Verified Offer Flow

Place a Deposit

Complete the form below to place your deposit.

Payments are processed through Stripe. SCM does not store card numbers.

Powered by Stripe

Essentials

  • VIN: 1G1YW2DW5D5103055
  • Title Status: Clean Title
  • Chassis Mileage: 23,000
  • Build Mileage: 1,500

Description

805+whp 2013 Chevrolet Corvette Grand Sport 3LT in Black with 23,000 (Chassis) miles for sale! The heart of this sinister Grand Sport consists of a Thompson Motorsports 417ci that’s matched with an A&A Ti trim V3 supercharger kit, and mated to a Circle D Level 4 6L80 6-speed automatic transmission. This build comes equipped with countless quality components, all of which were installed by the owner, and brought together with a tune via HPTuners by Eric at Moorespeed along with Pat G for the transmission tune. The car previously laid down 805whp, however it hasn’t been back on the dyno since switching to a smaller pulley. The interior is a 9.9/10 as the black leather interior is in excellent shape with no tears, HUD still works along with the factory Bose audio. The exterior is a 9/10 with a full paint correction (no swirls), just some typical Corvette “pepper chips” on the front. A/C is still functional and charged! There’s approximately 1,500 miles on the build with receipts for the work that was performed! Clean title!

Modifications

Engine:

  • Thompson Motorsports 417ci (New LS3 Block)
  • CP Bullet -11.2cc Pistons
  • K1 Rods
  • K1 Crankshaft
  • King Rod/Main/Cam Bearings
  • Frankenstein Stage 1 Cylinder Heads
  • RPM LS3 Camshaft (Part of Their “Stage 3” Package)
  • Comp Trunnion Upgrade
  • Thompson Motorsports Lifters
  • Melling High Pressure Oil Pump
  • ARP Head Studs
  • Hinson Poly Mounts
  • Vibrant Catch Can Mounted Behind RT Fender w/ Radium 1/4 Turn Drain & Vent Routed to Rear
  • Vibrant Vacuum Block (Behind RT Fender)
  • Black Powermaster Alternator
  • Black Powder Coated Accessory Bracket

Supercharger System:

  • A&A Ti Trim V3 Black Kit (New Bracket w/ Billet Tensioner)
  • A&A/Turbosmart 50mm Raceport (To Atmosphere) Bypass Valve
  • Upgraded High RPM Ceramic Hybrid Bearings
  • A&A 8-Rib Dedicated Blower Belt w/ 6-Rib Secondary Drive (Flip Drive Style)
  • Innovators West 10% Overdrive crank Pulley for Dedicated 8-Rib Setup
  • GripTec 3.4” Supercharger Pulley

Fuel System:

  • Injector Dynamics ID1050X Fuel Injectors
  • Racetronix Direct Wire & Intermediate Fuel Pump Harnesses
  • DSX Flex Fuel Sensor/Custom Black PTFE Lines (Wired, But Not Active)
  • Custom “ECS Style” Secondary Fuel System
  • ECS Billet Fuel Block -10AN Feed/-8AN Return (Return Not Used Currently)
  • -10AN PTFE Braided Hose to Pump/-8AN to Factory Feed Line
  • AEM400 Pump (Activated by Hobbs Switch in Intake Manifold)
  • Aeromotive Fuel Line Adapter to Factory Feed Line (Still Uses OEM In-Tank PSI Regulator)

Exhaust:

  • ARH 2” Headers/X-Pipe (Cerakoted Black)
  • OEM NPP Bi-Mode Mufflers
  • ARP Stainless Header to Head Bolts
  • AEM Can Bus Wideband w/ Gauge Mounted in Dash Vent
  • Custom “Mild-2-Wild” Switch For Exhaust (Button in Cig. Lighter Hole - Not Remote, Reservoir Mounted in Rear Bumper)

Cooling:

  • ProMeth Methanol Injection Pump (Mounted Behind Driver Side Fender)
  • ProMeth Washer Fluid Tank Adapter
  • Braided -4AN PTFE Hose
  • Dual ProMeth Nozzles
  • AEM Methanol Injection Controller
  • A&A Short Radiator w/ Trans & Oil Cooler
  • Upgraded Radiator Fan Connectors (To Fix Common Melting Issue w/ High Duty Cycle)
  • 160* Thermostat
  • Custom -10AN Oil Cooler Lines, Derale Oil Cooler Adapter to In-Rad Oil Cooler
  • Custom Derale Transmission Cooler w/ Automatic Fan behind Driver Side Fog Lamp

Tuning:

  • Tuned via HPTuners
  • Modified Pat G Transmission Tune

Drivetrain:

  • Circle D Level 4 6L80 6-Speed Automatic Transmission w/ Billet Planetary, Powerglide Style 4/5/6 Clutches, Etc.
  • Circle D Billet Triple Disc 3200 Stall Converter
  • Shane Hinds Transmission/Differential Brace
  • F1 Shifter Mod w/ Black Billet Paddle

Wheels/Tires & Suspension:

  • 19x10 BC Forged NA HSC04S Front Wheels
  • 17x11 BC Forged NA RZ Rear Wheels
  • Rear 305/45/17 Mickey Thompson ET Street S/S Drag Radials
  • Eibach Lowering Bolts All Around

Interior:

  • 5% Tint on Side Windows & Rear Glass

Exterior:

  • Full Paint Correction
  • EOS Carbon Fiber ZR1 Style Front Splitter & Side Skirts
  • Eagle Eye LED Tail Lamps
  • Matching LED Headlight & Fog Light Bulbs
  • Smoked LED Front & Rear Marker Lights

Videos

Every vehicle on Street Car Market is hand-selected and held to a high standard. Each listing is submitted by the seller and reviewed for accuracy before going live on our platform. While we take great pride in the quality of builds we feature, we encourage all buyers to verify the details of any vehicle and inspect it in person when possible before completing a purchase. Buyers are responsible for confirming registration requirements, and emissions compliance in their state. Have a specific question about this vehicle? Use the Ask a Question button above to speak directly with the seller.

Listing

Discussion