Skip to main content

850whp 2018 Audi RS3

Price / Location
$75,000 - Los Angeles, CA
Posted
Updated
This vehicle has been sold! We were able to connect the seller with a serious buyer, and we'd love to do the same for you. Looking for a similar build or interested in seeing what else is available? Check out our current listings!

Verified Offer Flow

Ask a Question

Have a question about this vehicle? Send a message to the seller.

Verification Required

Connect With the Seller

To maintain a professional marketplace and protect our sellers' time, we require a valid payment method on file to send messages.

  • No charges will be made
  • Card is only charged if you place a deposit
  • Secure processing via Stripe
  • Takes 30 seconds

Why do we require this?

This ensures only serious, verified buyers contact sellers, creating a better experience for everyone.

Verified Offer Flow

Place a Deposit

Complete the form below to place your deposit.

Payments are processed through Stripe. SCM does not store card numbers.

Powered by Stripe

Essentials

  • VIN: WUABWGFFJ1905017
  • Title Status: Clean Title
  • Chassis Mileage: 37,200
  • Build Mileage: 3,300

Description

850whp 2018 Audi RS3 in Nardo Gray with 37,200 (Chassis) miles for sale! This RS3 is powered by an FFE spec built/sleeved engine with an IMS 1000 full frame turbo kit, the power generated from this combination is transferred to the Quattro all-wheel-drive system through a 7-speed dual-clutch transmission with DCT HD 1300 clutches/IROZ upgraded flywheel. Diving deeper into the build, the FFE spec engine features sleeves, JE Ultra pistons with upgraded wrist pins, FFE X beam rods with ARP 625 rod bolts, ACL coated rod/main bearings, built head (Ferrea valvetrain kit), IROZ plenum (intake manifold), and Stav Built runners. This setup is fueled by an A2B dual pump fuel system with upgraded fuel lines, and a set of Injector Dynamics ID1300 injectors. Additional key components include an APR intercooler, IROZ charge pipe with a TiAL BOV, 5” IROZ intake with an air shroud, Melen TCU titanium exhaust, Syvecs Haldex controller, 18” WedsSport TC105X wheels wrapped in Hoosier DR2s, and more. Modifications were installed by EMD Auto/FFE/IROZ, and tuning was handled via Syvecs by Stijn Jacobs with an output of 850whp on a Mustang Dyno. As for track times, this setup yielded a 5.8 in the 1/8-mile (8 second 1/4-mile car), and it went 60-130 in 3.9s. The exterior shows very well as the car was always hand washed, garaged, and the stunning factory Nardo Gray paint was ceramic coated. The owner has pretty much all of the stock parts minus the stock exhaust. There are currently only 3,300 miles on the build with receipts for the work that was performed! Clean title!

Factory Options

  • Nardo Gray Exterior
  • Red Stitching
  • Dynamic Plus Package
  • Technology Package
  • Comfort Package
  • Carbon Ceramic Brakes
  • Carbon Fiber Exterior Package

Modifications

Engine (3K Miles):

  • FFE Spec Engine
  • Sleeved
  • JE Ultra Pistons w/ Upgraded Wrist Pins
  • FFE X Beam Connecting Rods w/ ARP 625 Rod Bolts
  • ACL Coated Rod & Main Bearing Set
  • 12mm Head Studs
  • Built Head (Ferrea Valvetrain Kit)
  • IROZ Engine Catch Can
  • IROZ Front Main Seal
  • IROZ Plenum (Intake Manifold)
  • Stav Built Runners

Turbo System:

  • IMS 1000 Full Frame Kit w/ Turbo Speed Sensor
  • IROZ Charge Pipe w/ TiAL Blow Off Valve
  • APR Intercooler
  • 5” IROZ Intake w/ Air Shroud

Fuel System:

  • Injector Dynamics ID1300 Fuel Injectors
  • A2B Dual Pump System w/ Upgraded Fuel Lines

Exhaust:

  • Melen TCU Titanium Exhaust

Electronics:

  • Syvecs ECU, EGT/Coolant Pressure Sensors
  • Tuned by Stijn Jacobs
  • Syvecs Haldex Controller
  • 5 Bar Map Sensor

Drivetrain:

  • DCT HD 1300 Clutches
  • IROZ Upgraded Flywheel
  • IROZ DSG Catch Can
  • APR Upgraded Driveshaft Bolts
  • Upgraded Guibo Driveshaft Plate

Suspension/Chassis:

  • EMD Lowering Springs
  • EMD Rear Sway Bar w/ Adjustable End Links
  • ECE Dog Bone Mount
  • 034 Stage 1 Engine & Transmission Mounts
  • 034 Front Subframe Locking Collars
  • 034 Rear Subframe Mount Inserts
  • RACE3 Skinny/Crash Bar

Wheels & Tires:

  • 18x9.5 +45 WedsSport TC105X Wheels (Coated)
  • Hoosier DR2s w/ Plenty of Life Left
  • Extra Set of Yokohama A052s (Less Than 1K Miles)

Exterior:

  • Ceramic Coated

Maintenance:

  • Oil Changes & Spark Plugs Changed Every 2-3K Miles
  • New Set of DI Injectors Installed at 33K Miles (Latest Revision N)
  • DSG/Haldex Serviced at 33K Miles (Serviced Twice)

Videos

Every vehicle on Street Car Market is hand-selected and held to a high standard. Each listing is submitted by the seller and reviewed for accuracy before going live on our platform. While we take great pride in the quality of builds we feature, we encourage all buyers to verify the details of any vehicle and inspect it in person when possible before completing a purchase. Buyers are responsible for confirming registration requirements, and emissions compliance in their state. Have a specific question about this vehicle? Use the Ask a Question button above to speak directly with the seller.

Listing

Discussion