Skip to main content

900whp 1999 Pontiac Firebird

Price / Location
$35,000 - Davison, MI
Posted
Updated
This vehicle has been sold! We were able to connect the seller with a serious buyer, and we'd love to do the same for you. Looking for a similar build or interested in seeing what else is available? Check out our current listings!

Verified Offer Flow

Ask a Question

Have a question about this vehicle? Send a message to the seller.

Verification Required

Connect With the Seller

To maintain a professional marketplace and protect our sellers' time, we require a valid payment method on file to send messages.

  • No charges will be made
  • Card is only charged if you place a deposit
  • Secure processing via Stripe
  • Takes 30 seconds

Why do we require this?

This ensures only serious, verified buyers contact sellers, creating a better experience for everyone.

Verified Offer Flow

Place a Deposit

Complete the form below to place your deposit.

Payments are processed through Stripe. SCM does not store card numbers.

Powered by Stripe

Essentials

  • VIN: 2G2FV22G6X2214764
  • Title Status: Clean Title
  • Build Mileage: 200

Description

900whp 1999 Pontiac Firebird in Black for sale! This is a turn key build that's ready to go small tire racing, street car shootout, or switch it to a slick and go no prep/street racing. The engine was built by Baker Engineering LLC. on 6/22/20, Capizzi Automotive LLC built the transmission, and all chassis/fabrication work was done by K&D fabrication. Jon Capizzi tunes the car, it put down around 900whp @ 23psi. The owner runs the car NO TIME, but will discuss with serious buyers. Based off of what he's been running in the 1/8-mile, it will go deep into the 8 second range as it sits in the 1/4-mile. It weighs about 3350 with the owner in it. There are currently 20 1/8-mile passes, 5 1/4-mile passes, and probably 200 street miles on the build. Receipts are available! Clean title!

Modifications

Engine:

  • LC9 5.3 Block Stroker 383
  • Wiseco Pistons
  • Callies Crank
  • K1 Rods
  • BTR Stage 4 Turbo Cam
  • New Plugs, Wires Done by Capizzi

Turbo System:

  • Forced Inductions S485
  • Huron Speed Hot Side & Cold Side

Fuel System:

  • Aeromotive Pro Series Fuel Pump
  • Aeromotive Fuel Filter Before & Magnafuel Filter After Pump
  • Bosch 210 Injectors (Flowed/Cleaned 8/22/20)

Electronics:

  • Holley Terminator EFI
  • 7" Digital Holley Dash
  • 5 Bar Map Sensor
  • (2) Electric Fans on Switch Panel

Drivetrain:

  • Reid Case Abruzzi "Mac Daddy" Glide
  • 1.80 First Gear
  • B&M Pro Bandit Shifter w/ Spot for C02 Upgrade
  • PTC Converter (Dustin Bradford Spec'd)
  • Trans Temp Gauge
  • Ford 8.8 w/ Strange 35 Spline Axles & Spool
  • 3.73 Gear

Chassis:

  • 8.50 Cage NHRA Certed Until 2022
  • Full Custom Tube Front End Done by K&D Fabrication Over The Last Winter
  • Mini Tubbed
  • Narrowed 3" on Each Side

Suspension:

  • Viking 19 Way Adj. Rear Coilovers
  • QA1 Shocks Up Front w/ QA1 350Ib Springs

Wheels & Tires:

  • 17" Welds w/ M&H Racemasters
  • 15" Weld Beadlocks w/ New MT Radial Pro 275s

Interior:

  • Kirkey Seats
  • H3R Halguard Fire Extinguisher
  • Motion Raceworks C02 Bottle & Mount

Exterior:

  • New Parachute
  • New Fog Lights, New Bumper & New Hood, Painted Earlier This Year

Every vehicle on Street Car Market is hand-selected and held to a high standard. Each listing is submitted by the seller and reviewed for accuracy before going live on our platform. While we take great pride in the quality of builds we feature, we encourage all buyers to verify the details of any vehicle and inspect it in person when possible before completing a purchase. Buyers are responsible for confirming registration requirements, and emissions compliance in their state. Have a specific question about this vehicle? Use the Ask a Question button above to speak directly with the seller.

Listing

Discussion